
Thrive Landscape and Design designs and builds custom fences across the greater Austin, TX area for homeowners who need something a stock 6-ft cedar panel cannot deliver. That includes mixed-material runs (cedar pickets on metal posts, horizontal blended with vertical, board-on-board with cap-and-trim), 8-ft deer-exclusion sections for Hill Country properties, decorative gates with pool-code latches, and mixed-material entry features at the driveway. Every job is surveyed before we break ground, every HOA submittal is handled in writing, and every post is set to caliche-bedrock depth across west Travis County. For over 20 years we have built fences that match the property, the neighborhood, and the way the owners actually use the yard.
Learn More- 500+ Projects Completed
- 19+ Years Experience
- 5/5 Average Rating
Other Fence Builds We Handle

Wood Fences
Cedar, pine, and treated wood fences built straight, plumb, and stained to last in the Austin sun.
Learn More
Aluminum & Metal Fences
Steel and powder-coated metal fences for security, pool code, and clean modern lines around Austin homes.
Learn More
Gates & Automatic Gates
Swing and sliding gates with keypad, intercom, and automatic openers, built to match your custom fence.
Learn More
All Fence Contractor Services
See the full range of fence installs, repairs, and gate work we offer across the greater Austin area.
Learn More
Our Process

Design Consult
We walk the property with you, sketch picket profiles and gate elevations on the spot, talk through mixed-material options, and lock in heights that work for the view, the dog, the deer pressure, or the HOA. You leave with a clear design direction, not a generic catalog quote.
Survey & Permit
We pull your plat or order a fresh property survey, verify setbacks and sight-visibility triangles on corner lots, prepare the HOA submittal packet with elevations and stain color, and pull a City of Austin permit when the design crosses a height or zoning threshold. No work starts until every approval is in hand.


Build
Posts are drilled into caliche bedrock and set in concrete to spec. Cedar is hand-picked off the rack for grain and color, metal posts are plumbed before the wood goes on, and decorative gates are hung with self-closing hinges and pool-code magnetic latches where required. We clean the site at the end of every workday.
Stain & Seal
Once the wood has dried to the right moisture content, we stain and seal the entire fence in the color approved by you and your HOA. Sealing the cedar slows UV greying, protects against the Texas sun, and locks in the look you signed off on at the design consult. We walk the finished fence with you before final payment.

Custom Fence Installation


Signs You Need a Custom Fence
Custom Fence Installation in Austin
Most homeowners try to make a stock 6-ft cedar fence work first. These are the signs the off-the-shelf option will not fit your property, your neighborhood, or the way you live.
Request A QuoteSteiner Ranch, Westlake, and Lakeway HOAs often specify picket width, rail count, post spacing, and stain color. A stock fence will fail review. A custom build is drawn to the guidelines before submittal.
Standard 6-ft fences do not stop whitetail. An 8-ft deer-exclusion section, often built as mixed cedar and wire on metal posts, protects gardens, fruit trees, and ornamentals across west Travis.
Pool-barrier code requires self-latching gates at a set height with no climbable gaps. Corner lots have sight-visibility triangles a stock layout will violate. Custom design solves both.


Why Choose Thrive Landscape and Design?
Bespoke Design, Not Catalog Picks
Every custom fence is drawn for the property. Mixed materials, non-standard heights, decorative gates, and entry features are built around the lot.
Survey & HOA Aware
We pull surveys, verify setbacks on corner lots, and build the HOA submittal packet before posts go in the ground.
Bedrock-Ready Crews
Rock augers and rotary hammers reach proper post depth in west Travis caliche where standard diggers stop at 12 to 18 inches.
Pool-Code Gate Hardware
Self-closing hinges and self-latching magnetic latches are standard on every custom gate serving a pool barrier.
Austin’s Go-To For Custom Fence Installation
Custom fence design, build, stain, and seal across Austin and the surrounding Hill Country. We coordinate with the City of Austin Development Services when permits are needed and follow Texas Parks & Wildlife guidance on deer exclusion fencing.
- Lakeway
- Driftwood
- Westlake Hills
- Round Rock
- Lake Point
- Bee Cave
- Shoal Creek
- River Place
- Cedar Park
- Steiner Ranch
- Pflugerville
- & more
Frequently Asked Questions
A custom fence is anything beyond a standard 6-ft cedar privacy panel. That includes non-standard heights, mixed materials like cedar pickets on metal posts, board-on-board with cap-and-trim, horizontal mixed with vertical, decorative gates, and full mixed-material entry features at driveways. If a stock fence will not solve the problem, we design and build something that will.
Yes. We measure picket width, rail spacing, post profile, cap detail, and stain color so the new run reads as a continuation of what is already there. This is common on shared property lines in Westlake, Tarrytown, and older Austin neighborhoods where mismatched runs stand out.
We build cedar pickets onto steel or powder-coated metal posts, combine board-on-board panels with stone or stucco columns, and pair horizontal cedar with metal accent panels. Metal posts are set deeper in concrete to carry the wood, and we use galvanized hardware so dissimilar metals do not corrode against the cedar.
City of Austin Development Services generally exempts residential fences under 7 ft from a permit, but anything taller, anything in a front-yard setback, anything on a corner lot near a sight-visibility triangle, or anything in a historic district usually does require review. We pull the permit when one is needed and handle the submittal.
Yes. We have built in Steiner Ranch, Lakeway, Westlake, and other Austin HOAs with strict dimensional standards. We pull the current architectural guidelines, draft a submittal packet with elevations, materials, and stain color, and revise once if the committee asks for changes. We do not break ground until the approval letter is in hand.
Caliche bedrock often sits at 12 to 18 inches across west Travis County, so a standard post-hole digger will not reach proper depth. We drill into the rock with rock augers and rotary hammers, then set posts in concrete to spec. We quote bedrock drilling separately so the price is honest before we start.
Any custom gate on a property with a pool is built to Texas pool-barrier requirements: self-closing hinges, a self-latching mechanism set at least 54 inches above grade, and no openings a 4-inch sphere can pass through. Magnetic latches are our default for new pool gates because they hold up to Hill Country weather.
Call us at (512) 503-1935 or use the contact form on this page. We will schedule a free on-site visit, walk the property, talk through materials and design, and send a written quote with elevations and a clear scope so there are no surprises.














